T-Shirt Printer – Four Specs to Look for Whenever Selecting a T-Shirt Printer.

by Aileen . 0 Comments

Do you want to give a photo in your quilt that looked a lot more like section of the fabric than an iron-on decal?

Previously, we relied on photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an excellent new way to get your chosen photo away from your scrapbook and onto your quilt block.

Direct-to-garment (DTG) printing is a form of digital printing. Using a value of about $20,000, it’s not practical to work out and acquire your own DTG printer. The standard price for latte printer is $8 to $10.

This technique might be a more costly compared to traditional photo transfer method. That’s partially since the technology is really new. If you do choose to try out a DTG photo in your memory quilt block, there are some things to look for in selecting the printer who will carry out the work for you:

1. Ensure you can find no chemicals necessary to pre-treat your fabric first. Some DTG printers create a photo that may be a lot more like screen printing. You don’t want that appear to be or feel on your quilt. The ink is going to be hard on top of the fabric and can eventually (sometimes much sooner than later) will start to crack and wear with washings. Ask your prospective printer to view a sample of something they’ve printed. If you can feel the ink is raised above the surface in any respect in any way, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing made available from the Brother GT 541. You will find no chemicals necessary to pre-treat the fabric. The inks bond with all the natural fibers and so are heat cured to create the image. The inks are water based, which assists leave a soft yet crisp image on the fabric.

There are many downfalls to using a4 uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form an electronic digital printing, there is not any white ink. White is the absence of color. Consequently you are unable to print a photograph on navy blue or black fabric.

Digital garment or fabric printing is actually a CMYK format – cyan, magenta, yellow, and black. It is possible to mix those colors to get a full spectrum of accurate colors – simply not white. You can find DTG printers that print white ink, but most of these require chemical pre-management of the material and may leave you with that thick surface print.

You have to use a light colored or neutral fabric and it ought to be cotton or possibly a cotton blend. The material must have the capacity to withstand 350 degrees for around half a minute. In case you are not 09dexypky with 100 percent cotton or possibly a 50/50 blend, ask your printer if the fabric will continue to work.

Scale of your print could be a limitation. Most DTG printers have got a printing field approximately 14 inches x 16 inches. For most quilters, that size range won’t be a problem.

And talking about printing fields, here’s a hint. Most direct to t-shirt printer charge for the 14×16 surface. Should your blocks enables 2 or 3 photos to suit within that range, you could get them all printed for the buying price of one. Consult with the printer to ascertain if it’s possible along with your particular project.

Like other technological advances, the cost of digital garment (or fabric) printing probably will decrease as time passes. Maybe it can be also available on smaller printers for home and private use. Until then, try to get a DTG printer for your next photo quilt project. The final results will look like custom fabric, that is to be an excellent touch for your extraordinary quilt!

Leave a Reply

Your email address will not be published. Required fields are marked *